UPVC Door Lock Replacement
UPVC doors are a great deterrent to break-ins. However they do have some limitations that can be addressed by installing a deadlock.
It may be time to replace the lock's barrel if your uPVC door lock feels a bit loose. This simple DIY project will improve the security of your home and enhance its appearance.
Remove the old lock cylinder
You may have a damaged lock-cylinder when you notice that your front door feels flimsy or the key struggles to turn. Replacing it will ensure a smooth operation and increase security. The process is relatively easy and will take around 30 minutes. You'll require an screwdriver. To begin by opening your door, look at the edge near the lock the cylinder. There should be a screw there that is roughly in line with the bottom of the cylinder. Remove it using a screwdriver, and keep it in a safe place.
You'll have to know the dimensions of your current cylinder to ensure you can choose a suitable replacement. The sizes typically range from 60mm to 110mm. To determine the size, first you'll need to find the screw on the lock faceplate and then take it off. You may also try to turn the lock handle using the key when the cylinder is in place to observe how much it shifts in each position.
Next, you'll need to determine the cylinder's diameter and length of the cylinder cam. These measurements will help ensure that your new lock is compatible with the door that you already have. The dimensions of the lock can differ based on the kind of uPVC. You'll need to pick an alternative cylinder that is the same size or a bit larger than the one you have currently.
Once you have the measurements, it's time to remove the old cylinder from the door. It's a fairly simple job, but it's essential to do it properly to avoid damaging the frame or door. Make sure that the door is propped up or secured so that it won't shut between steps.
If you don't wish to tackle it yourself, hiring a professional locksmith is a good alternative. They can provide expert advice, flawless execution, and peace of mind. They can also help you in selecting a safe and secure lock system. DIY can be a good way to save money and gain new techniques. You only need a little patience and the right tools, such as a Phillips Screwdriver. It's not as difficult as you might think to change the locks on your uPVC locks.
Installing the new lock cylinder
When replacing the lock on your front door, it's crucial to take the correct measurements and follow the steps to ensure that the new one is installed correctly. This will not only avoid future problems, but will also ensure your home is more secure and allow you use keys from both sides of the front door. Before you replace your uPVC lock, you should take measurements of the overall length and of the backset and the cylinder's diameter. These measurements will ensure that the lock cylinder can fit into the uPVC and operate effectively without gaps.
The first step is to take the handle from the door by loosening it with the help of a screwdriver. The next step is to locate the screw that holds the lock in place and then remove it. You can then take out the lock you have previously used by inserting the key into the cylinder and turning it both left and right. When the key is in either of these positions you will be able to get rid of the cylinder by pulling it out of its slot.
Installing the new cylinder inside the front door is relatively easy and will require the same steps as you used to remove the old one. Be aware that the new cylinder will not fit in the space created by the old cylinder. This is because the cylinder must be aligned correctly to allow it to be locked and closed using keys. It is important to ensure that the cylinder is in the center and has a circular keyway.
Installing the latest uPVC lock in your front door is not difficult, but you must be careful not to damage the handles or door frames. If you are unsure about your capability to complete the task then you should seek out an experienced locksmith who is Checkatrade Approved and has worked with these kinds of doors. A locksmith can help you save time and money by completing the task quickly.
Attaching the door handle
You may decide to upgrade your lock on your front door for a variety of reasons. You might have lost a lock key and the previous tenant has not returned the keys, or you want to upgrade to an extra secure lock. Changing the lock barrel on a uPVC door is a straightforward task that can be accomplished in just five minutes. You'll need a Phillips head screwdriver, the new lock cylinder and an extra key (if you intend to make use of one). Ensure that the door is opened or secured safely so that it won't close during the process.
There are some issues when changing the uPVC front door lock mechanism, but they're not as difficult to resolve as you might think. It is essential to begin by identifying the kind of lock you have on your front door and what size you require for the replacement. For older doors, there are strip locks and multipoint lock options. Once you've identified the manufacturer and model of lock on your uPVC front door, it's a lot easier to locate a similar replacement.
After replacing the cylinder, you'll need reconnect the door handle to it. First, you'll need to loosen the set screw on the shaft of the handle using a screwdriver or Allen key. door locks replacement will permit you to take the handle off and expose the spindle shaft. If the shaft is threaded, you'll need to loosen it a little and back it up with a screwdriver in order to ensure a proper fit.
After you've tightened the screws on the new handle and the lock cylinder, it's time to test the lock. Verify that the key is turning easily and fits well and that the locking mechanism of the handle is working correctly. If you're not comfortable doing this yourself you can have a locksmith do the job for you.
It's also worth remembering that uPVC door handles and lock mechanisms require regular lubrication to ensure their functions. This is particularly true in areas of high wear and tear such as those that are used frequently or shut and locked. A small amount of lubricant can help in increasing their lifespan and making sure they function correctly.
Test the new lock
A Upvc lock is an essential element in the security of your home. Like all other devices the uPVC lock may get damaged or worn out in time. Regular maintenance is crucial to a functioning uPVC locking system. This will prevent malfunctions from occurring and can compromise your home's security. The best way to accomplish this is to grease the internal mechanisms using an approved oil every six months. This will stop the lock from rusting and causing damage.
You can apply a silicon spray in addition to the standard lubricant to loosen the keyway. This will make it easier to insert keys. This is an easy DIY fix that can save you money in the long run. Be sure to not apply WD-40 as it can leave a residue of oil behind that could potentially damage the lock.
After installing the new cylinder, it is important to test it out before you decide if it functions correctly. This can be done by testing the handle from both inside and outside the door. If everything is working, you can then put the handles back into position and then re-insert the spindle screw. Replace all the screws that held the handles in place. Give yourself a pat on the back for a good job!
A locksmith can install extra features to enhance the security of your home, like door chains or sash jammers. They can even help you choose the best locks for your home. A professional can help you determine what size of cylinder is the best for your doors. This is crucial, as a mismatched lock could compromise your security.
The cost of replacing the lock of a uPVC lock varies based on the type of lock you choose and the number of doors that have to be replaced. The cost of a professional locksmith will range from PS75-PS100 per hour, but this price can vary depending on the location you live in and the kind of lock you require. It is also essential to compare locksmith prices before selecting a locksmith.
